This page details everything you need to know about how to complete The Mysterious Machine in Grounded, including how to fix the lasers by cutting down a blade of grass, where to find what’s weakening one of the lasers by killing mites underground, and how to activate the lasers.
How to Fix the Lasers¶
You’ll find The Mysterious Machine not long after you first arrive in the yard. It’s just northeast of the baseball, near to where you spawn in the chest, as shown in the map below. The first thing you’ll need to do is interact with the buttons on the machine to start it up.
Cut Down the Blade of Grass¶
When you first arrive at the machine you’ll notice that there are three lasers shining towards it if you look up. Two of these are hitting the connectors as they should, although one is weakened (we’ll get to that soon!), while the other is blocked. There’s a blade of grass to the northeast which is blocking the laser from hitting the connector, so you’ll need to cut this down first, which requires a Pebblet Axe. See our guide on How to Craft a Pebblet Axe to get one.
Once you’ve crafted the axe, equip it and then get slashing. When the grass is cut the laser should now be hitting the connector.
How to Find What’s Weakening the Laser¶
You can now move on to discovering what is weakening the other laser, which you can see is flashing from the southwest, towards the house. You’ll need to run over to the bottom of the machine here to find a hole in the ground, with some red mites chewing at the wires both outside and inside the hole. You’ll need to kill all of the red mites to stop the laser from being weakened, and you’ll need a torch to see properly underground. See our guide on How to Craft a Torch for that. If you haven’t got one already, we’d also recommend using a spear here to kill the red mites, which you can craft using our guide on How to Craft a Pebblet Spear.
Activate the Lasers¶
After you’ve killed all the red mites that are chewing at the wires both inside and outside the hole, the quest should update prompting you to investigate the machine further. You can now go back to the machine and interact with the buttons again, which will trigger a cutscene that directs you to the Oak Tree lab, located to the northeast of the machine, and leads you into the next quest.
No Comments